|
|
Description
High Performance - High Speed - High End
|
The Hpe®_midiv2 is a powerful and extremely versatile mother board that can be equipped with various modules containing one or two FPGAs.
It can be extended via child board connector that allows interfacing to additional Hpe® _child boards.
The special Elastomer connectors used at the interface between the
motherboard and the modules
allow for connections with very high frequencies and great pin numbers.
By now, the Hpe concept has been successfully since 2002. It renders the development and the
emulation of entire systems easy. To achieve that, the
Hpe®_midiv2 has been conceived with
versatility and programmability in mind.
A so-called "clock factory" is responsible for supplying the board with on-board or external clocks
according to the user's wishes. To get maximum
frequencies as high as possible, much know-how has been invested in the development of the board. Through the use of the ALTERA StratixIII FPGAs,
it is possible to integrate as much as 300,000 logic elements, which roughly corresponds to
3 million ASIC gates.
A wide range of software as well as a growing number of application examples allow for a fast implementation of your ideas.
|
 |
When making your way from early single prototypes to mass products, we are glad to be able to offer you our experience all along. Our engineers will
support you with their knowledge gained from many years of development and guarantee for the successful implementation of your concept. |
The system contains the following components: | Hpe®_midiv2 Baseboard
- Power Supply EU, UK, US
- 2 * USB1.1 Host + USB1.1 OTG
- 2kbit EEPROM
- Ethernet 10/100
- USB2.0 Target
- LIN
- CAN2.0b
- FlexRay
- 2 * RS232
- 2 * 20 Character LCD Display
- TFT and Touch Connector
- 2 * Status LED (Power)
- Cypress PSoC with
- 4 * 8 bit DAC
- 4 * 12 bit ADC
- AC97 Audio CODEC
- DVI-I
- SD-Card
- 5 * Push Buttons in Front Panel
- SMB Connector for External Clock
- RESET Supervisor
- Buzzer
| HM-ALC-FPGA Module
- ALTERA FPGA
EP3SL50F780-C2N for CPU
- ALTERA FPGA
EP3SL50F780-C2N or
ALTERA FPGA
EP3SL150F780-C2N for User Logic
- ALTERA USB Blaster
- Clock Factory
- 128Mb * 32 Flash
- 2 * 1Mb * 36 SSRAM
- 2kb EEPROM
- 2 * RS232
- ARM Debug Connector (JTAG)
- ARM Trace Connector
- 2 * SEmulator Connector
- 4 * 7 Segment Display
- 4 * DIP Switches
- 2 * 8 LED for Developer's Use
- 7 * Status LED
- 5 * Push Buttons
- 1 * Hpe_childboard Connector
|
Additional Deliverables
- Hpe_desk includes
- Clock Factory Programmer
- JTAG Debugger and Scanner
- AMBA IP Manager
|
|
